Package:
2 lithium-ion 7.4V 2200mAh rechargeable battteries
1 Multiple port charging system
Storage/carrying case
Instruction manual
Getting Started
Always remove the batteries from your gloves when charging
Charge your batteries at room temperature for three hours prior to first use
The LED light on the charger will illuminate RED while charging.
The LED light one the charger will illuminate GREEN when Charging is complete
Carefully connect the power wire inside the glove storage pocket to the battery
Position the battery inside the glove pocket and seal velcro along the top to secure the battery in place.
Heat Settings:
When batteries are installed the glove,Press on/off button first time, the heat setting to high(3 light
bars will illuminate).
Press ON/OFF button second time to reduce the heat setting to Medium(2 light bars will illuminate)
Press ON/OFF button a third time to reduce the heat setting to low(1 light bars will illuminate)
Press ON/OFF button a fourth time to turn glove heat system of (all light bars will shut off)
Heating time chart
HEAT TIME CHART | ||
100% heat |
66% heat |
33% Heat |
2.5-3 hours |
3-4 hours |
4-6 hours |
Wash and Care
Remove batteries from gloves when being cleaned and stored
Do not machine wash
Do not machine dry
Do not bleach
Do not iron
Do not dry clean
Spot clean gloves by hand using only mild detergent
Air dry gloves lying flat
Warning
Glove, batteries and all connections should be inspected prior to use
Unplug the batteries from the charger once the batteries are fully charged
Gloves, batteries and charger are not compatible with any other product
Carefully Connect and disconnect batteries and power cords to aviod internal damage to glove wiring
Gloves and batteries should not be stored in high temperature environments
Do not use when sleeping
Children should be supervised when using this products
wy-plugin-end
Reviews
There are no reviews yet.